Installation Video

Installation Video: By Chapter

• 1: Introduction
  Introduction to the Under Deck Oasis ceiling system installation video's. Meet Tony Cobb, National Installation Trainer, and get set up to start installing Under Deck Oasis.

• 2: Determining Drainage Location
  Determining the Drainage Location is one of the first steps in proper Under Deck Oasis installation. Learn how and where to choose your drainage location.

• 3: Finish Options for Beam
  Discover the options for finishing your deck beam to compliment your Under Deck Oasis system.

• 4: Measuring For Pan Flashing
  Measuring for The Pan Flashing is very important, and not a step that should be overlooked.

• 5: Creating Pan Flashing
  Learn how to create the Pan Flashing for Under Deck Oasis.

• 6: Installing Pan Flashing
  Install the Pan Flashing over the beam to allow the water to flow back into the main portion of the Under Deck Oasis system.

• 7: Creating Over Flashing
  Review how to create the over flashing for the perimeter of the Under Deck Oasis system.

• 8: Installing Over Flashing
  Learn how to install the Over Flashing for Under Deck Oasis.

• 9: Sealing Joist at Beam
  A great tip on sealing the joist at the beam.

• 10: Setting The Alignment Carrier
  Tony shows you how to set a temporary carrier to align the rest of the system.

• 11: Notching Gutter for Side Cap
  Learn the technique to notch the gutter for the side cap.

• 12: Hanging Gutter to Set Panel Pitch
  Hang the Gutter To Set The Pitch.

• 13: Installing Side Cap
  Installing the Side Cap for the Under Deck Oasis system.

• 14: Securing Side Cap to Gutter
  Securing The Side Cap to the Gutter.

• 15: Setting the Gutter Pitch
  Set the pitch of the rain gutter for the Under Deck Oasis system.

• 16: Second Side Cap and End Cap
  Tony explains how to add and secure the end cap on the other end of the gutter.

• 17: Securing and Sealing Gutter
  Finish up the gutter by securing and sealing it.

• 18: Installing First Panel
  Take a look at how to install the first Under Deck Oasis panel.

• 19: Installing Carriers
  Discover how to install the Under Deck Oasis carrier. The carriers are the system component that the panels attach to.

• 20: Adjoining and Installing G Channel
  Learn how to adjoin and install the G-Channel for the Under Deck Oasis system.

• 21: Preparing Panels for Installation
  Tony shows you how to prep the panels for installation.

• 22: Adjoining Carriers
  Learn how to adjoin two piece of Under Deck Oasis carrier.

• 23: Installing Panels
  Tony explains the technique to install the system panels.

• 24: Removing a Panel
  Take a look at how to remove a panel to make adjustments.

• 25: Installing the Last Panel
  Learn how to install the last panel of the Under Deck Oasis system.

More Installation Video + Tips and Tricks

• Measuring the First Panel
  Learn how to measure for the first panel.

• Installing the First Panel
  How to install the first panel

• Installing Carriers into Panel for Alignment
  Learn how to use a panel to line up the carrier.

• Splicing Carriers
  Learn how to splice two carriers together.

• Using the "Eyeball Method" for keeping panels straight
  Using the "Eyeball Method" to get the panels straight.

• Measuring and Creating the Last Panel
  How to install the Under Deck Oasis panels.

• Installing Panels
  How to install the Under Deck Oasis panels.

• Keeping Downward Tension on Panel
  How to keep a slight downward pressure to the panels to ensure they do not rattle.

• Installing the Last Panel
  Learn how to modify and install the last Under Deck Oasis panel.

• Removing a panel from the system
  Learn how to remove an Under Deck Oasis panel from the system.

• Flashing blocked cantilever
  How to flash over a blocked cantilever.

• G-Channel and Sidecap with Miter
  Mitering a G-Channel and Side Cap together.

• Measuring and Installing the Side Cap
  How to measure and install side cap for the Under Deck Oasis system.

• Splicing G-Channel
  How to splice two pieces of G-Channel together.

• Notching Gutter for Sidecap
  How to notch the gutter to allow for the side cap.

• Installing the Gutter
  How to measure and install the gutter correctly for proper drainage.

• "Over Flashing" on Gutter
  Using over flashing on the gutter, for when you cannot use sealant.

• Installing an electrical box
  Installing an Electrical Box on the Under Deck Oasis system, for lights and fans.