This series of videos includes the entire installation process for the Under Deck Oasis under deck drainage system.

Install Video by Chapter

• 1: Introduction

  Introduction to the Under Deck Oasis ceiling system installation video's. Meet Tony Cobb, National Installation Trainer, and get set up to start installing Under Deck Oasis.

• 2: Determining Drainage Location

  Determining the Drainage Location is one of the first steps in proper Under Deck Oasis installation. Learn how and where to choose your drainage location.

• 3: Finish Options for Beam

  Discover the options for finishing your deck beam to compliment your Under Deck Oasis system.

• 4: Measuring For Pan Flashing

  Measuring for The Pan Flashing is very important, and not a step that should be overlooked.

• 5: Creating Pan Flashing

  Learn how to create the Pan Flashing for Under Deck Oasis.

• 6: Installing Pan Flashing

  Install the Pan Flashing over the beam to allow the water to flow back into the main portion of the Under Deck Oasis system.

• 7: Creating Over Flashing

  Review how to create the over flashing for the perimeter of the Under Deck Oasis system.

• 8: Installing Over Flashing

  Learn how to install the Over Flashing for Under Deck Oasis.

• 9: Sealing Joist at Beam

  A great tip on sealing the joist at the beam.

• 10: Setting The Alignment Carrier

  Tony shows you how to set a temporary carrier to align the rest of the system.

• 11: Notching Gutter for Side Cap

  Learn the technique to notch the gutter for the side cap.

• 12: Hanging Gutter to Set Panel Pitch

  Hang the Gutter To Set The Pitch.

• 13: Installing Side Cap

  Installing the Side Cap for the Under Deck Oasis system.

• 14: Securing Side Cap to Gutter

  Securing The Side Cap to the Gutter.

• 15: Setting the Gutter Pitch

  Set the pitch of the rain gutter for the Under Deck Oasis system.

• 16: Second Side Cap and End Cap

  Tony explains how to add and secure the end cap on the other end of the gutter.

• 17: Securing and Sealing Gutter

  Finish up the gutter by securing and sealing it.

• 18: Installing First Panel

  Take a look at how to install the first Under Deck Oasis panel.

• 19: Installing Carriers

  Discover how to install the Under Deck Oasis carrier. The carriers are the system component that the panels attach to.

• 20: Adjoining and Installing G Channel

  Learn how to adjoin and install the G-Channel for the Under Deck Oasis system.

• 21: Preparing Panels for Installation

  Tony shows you how to prep the panels for installation.

• 22: Adjoining Carriers

  Learn how to adjoin two piece of Under Deck Oasis carrier.

• 23: Installing Panels

  Tony explains the technique to install the system panels.

• 24: Removing a Panel

  Take a look at how to remove a panel to make adjustments.

• 25: Installing the Last Panel

  Learn how to install the last panel of the Under Deck Oasis system.

More Installation Video + Tips and Tricks

• Measuring the First Panel

  Learn how to measure for the first panel.

• Installing the First Panel

  How to install the first panel

• Installing Carriers into Panel for Alignment

  Learn how to use a panel to line up the carrier.

• Splicing Carriers

  Learn how to splice two carriers together.

• Using the "Eyeball Method" for keeping panels straight

  Using the "Eyeball Method" to get the panels straight.

• Measuring and Creating the Last Panel

  How to install the Under Deck Oasis panels.

• Installing Panels

  How to install the Under Deck Oasis panels.

• Keeping Downward Tension on Panel

  How to keep a slight downward pressure to the panels to ensure they do not rattle.

• Installing the Last Panel

  Learn how to modify and install the last Under Deck Oasis panel.

• Removing a panel from the system

  Learn how to remove an Under Deck Oasis panel from the system.

• Flashing blocked cantilever

  How to flash over a blocked cantilever.

• G-Channel and Sidecap with Miter

  Mitering a G-Channel and Side Cap together.

• Measuring and Installing the Side Cap

  How to measure and install side cap for the Under Deck Oasis system.

• Splicing G-Channel

  How to splice two pieces of G-Channel together.

• Notching Gutter for Sidecap

  How to notch the gutter to allow for the side cap.

• Installing the Gutter

  How to measure and install the gutter correctly for proper drainage.

• "Over Flashing" on Gutter

  Using over flashing on the gutter, for when you cannot use sealant.

• Installing an electrical box

  Installing an Electrical Box on the Under Deck Oasis system, for lights and fans.

Installation Stories

• Installation in Ada, MI

  Installation in Ada, MI

• Installation in Byron Center, MI

  Installation in Byron Center, MI

• Installation in Grandville, MI

  Installation in Byron Center, MI

• Installation timelapse video

  Under Deck Oasis install timelapse video